Clear Systems

CV1800
CV1800 with Filters

Our Clear System cyclone bodies are built from heavy gauge 1/8" thick patented copolyester (PETG) plastic, which includes the best qualities of both acrylic (Plexiglas) and poly carbonate (Lexan). PETG plastic has the toughness and scratch resistance of poly carbonate, is cold forming (can be bent at room temperature to 90 degrees without breaking) and is very impact resistant. Additionally, it has the cost effectiveness of acrylic without being brittle.

Our cyclones are thermo-formed over machined round forms, making them as true to a perfect circle as possible. All seams on our cyclones are of an offset lap type joint, making the inside of the cyclone very smooth thus keeping air turbulence and friction to a minimum.

CV1450

The CV1450 is a powerful and efficient dust collection system. Ideal for woodworkers, small businesses or other entities needing fine dust collection. This system delivers 1450 CFM of suction – sufficient for most midsize shops.

The 6″ inlet requires an 6″ ducting main that can be split into 6″ drop lines to fully utilize its capacity.

Formerly CV1800 with 15″ impeller

CV1700

The CV1700 is a powerful and efficient dust collection system. Ideal for woodworkers, small businesses or other entities needing fine dust collection. This system delivers 1700 CFM of suction – sufficient for most midsize shops.

The 6″ inlet requires an 6″ ducting main that can be split into 6″ drop lines to fully utilize its capacity. The CV1700 is available with Single or Three Phase Power.

Formerly CV1800 with 16″ impeller

CV1950

Our CV1950 is designed to run up to two machines on a regular basis. This system delivers 1950 CFM suction – big enough for most size shops. The 8″ inlet requires an 8″ ducting main that can be split into 6″ drop lines to fully utilize its capacity. The CV1950 is available with Single or Three Phase Power.

Formerly CVMax

Assembly is required- please see our Assembly Instructions for more information.

All prices subject to change without notice.

 

CV1450 include:

  • Leeson 5HP Motor – Single Phase, 5HP, draws 20.8 FLA  at 230v – requires 30A breaker
  • Electrical Box with one Remote Control
  • 15″ Blower Assembly with backward-inclined, 6 Blade Welded Steel Impeller
  • CV1800 Cyclone Body with 6″ intake sized to receive sewer and drain PVC – ASTM D2729, ASTM D3034 and SDR 35 Pipe
  • 6″ Flex Hose & Clamps for easy connection to Collection Drum
  • Cyclone Hardware Kit
  • (1) Set Wall Mount Brackets

CV 1700 Single Phase include:

  • Leeson 5HP Motor – Single Phase, 5HP, 230v 12.2 FLA at 230v 20.8 FLA – requires 30A breaker.
  • Electrical Box with one Remote Control
  • 16″ Blower Assembly with backward-inclined, 6 Blade Welded Steel Impeller
  • CV1800 Cyclone Body with 6″ intake sized to receive sewer and drain PVC – ASTM D2729, ASTM D3034 and SDR 35 Pipe.
  • 6″ Flex Hose & Clamps for easy connection to Collection Drum
  • Cyclone Hardware Kit

CV 1700 Three Phase include:

  • Leeson Motor – Three Phase, 5HP, draws 12.2 FLA at 230v or 6.1 at 460v – requires 30A breaker
  • 16″ Blower Assembly with backward-inclined, 6 Blade Welded Steel Impeller
  • CV1700 Cyclone Body with 6″ intake sized to receive sewer and drain PVC – ASTM D2729, ASTM D3034 and SDR 35 Pipe
  • 6″ Flex Hose & Clamps for easy connection to Collection Drum
  • Cyclone Hardware Kit
  • (1) Set Wall Mount Brackets

CV 1950 Single Phase include:

  • Leeson 5HP Motor – Single Phase, 5HP, draws 20.8 FLA at 230v – requires 30A breaker
  • Electrical Box with one Remote Control
  • 16″ Blower Assembly with backward-inclined, 6 Blade Welded Steel Impeller
  • CV1950 Cyclone Body with 8″ intake sized to receive sewer and drain PVC – ASTM D2729, ASTM D3034 and SDR 35 Pipe
  • 6″ Flex Hose & Clamps for easy connection to Collection Drum
  • Cyclone Hardware Kit
  • (1) Set Wall Mount Brackets

CV 1950 Three Phase include:

  • Leeson Motor – Three Phase, 5HP, draws 12.2 FLA at 230v or 6.1 at 460v  – requires 30A breaker.
  • 16″ Blower Assembly with backward-inclined, 6 Blade Welded Steel Impeller
  • CV1950 Cyclone Body with 8″ intake sized to receive sewer and drain PVC – ASTM D2729, ASTM D3034 and SDR 35 Pipe.
  • 6″ Flex Hose & Clamps for easy connection to Collection Drum
  • Cyclone Hardware Kit
  • (1) Set Wall Mount Brackets

Nano Filter Information (If Selected)

  • Model: 9B300NANO
  • Flangeless
  • MERV Rating: 15
  • Efficiency: 99.999% at .5 micron
  • 12.75" OD x 34" x 8.4" ID (300 sq. ft.)

Collection Bin, Wall Mounting Brackets and Filter Clean Out Box sold separately.

With Filters

  • (2) 9B300NANO Wynn Filters– Flangeless – MERV Rating: 15 – Efficiency: 99.999% at .5 micron – 12.75″ OD x 34″ x 8.4″ ID (300 sq. ft.)
  • Filter Clean Out Box
  • Filter Clamp
  • 90° Filter Transition
  • (1) Set Wall Mount Brackets
Detail Spec
Performance: 1,442 CFM with 15" blower assembly (standard); 1,701 CFM with 16" blower assembly upgrade
Noise Level: 78 dB at 10’
Impeller: 15” (16" upgrade available)
Motor: 5HP, 230V - Draws 20.8 FLA
Intake Chute: 6.25 ID”
Filter Model: Wynn 9B300NANO
Filter Efficiency: 99.999% at .5 micron (MERV 15)
Static Pressure is a variable unit based on your individual shop set up and ducting design. You may find more information regarding static pressure as well as a calculator at: https://www.clearvuecyclones.com